165 Ton Machine


J165 EII Injection Molding Machine SpecificationsJ-EII Series Machines


J-EII Series


  • 5-Point Double Toggle design
  • Automatic lubrication system
  • Automatic die height adjustment
  • Dual torque screw motion
  • Injection Unit Screw Code K (optional) A B
    Screw diameter in  1.57 1.81 2.01
    Injection pressure(Max.) psi  34300 25900 21100
    Injection capacity (Theoretical) in^3  13.8 18.3 22.5
    Injection capacity (GP-PS) oz  7.3 9.6 11.8
    Injection rate in^3/sec  8.5 11.2 13.9
    Recovery rate (GP-PS) oz/sec  0.88 1.26 1.57
    Screw speeds High torque (Max.) rpm  160
    Screw speeds Low torque (Max) rpm  275
    Screw stroke in  7.09
    Nozzle advancing in  2
    Type of nozzle Open nozzle
    "PID" cylinder temperature control Cylinder 4/Nozzle 1
    Clamping Unit Mechanism Double toggle
    Clamping force US ton  165
    Maximum daylight opening in  35
    Opening stroke (Max) in  17.3
    Mold height in  8.7~17.7
    Distance between tie-bars (H x V) in  20.1x20.1
    Platen size (H x V) in  29.1x29.1
    Hydraulic ejector 9 points
    Ejector force/stroke US ton/in  4.84/5.1
    Mold closing/opening speeds ft/min  171-135
    Electrical Equipment Pump driving motor HP  30
    Heater wattage kW  11.9
    Mold height adjusting motor HP  1
    Total power capacity kW  34.4
    Machine Dimensions and General Machine weight US ton  8.4
    Machine dimension (LxWxH) ft  17.86x4.30x6.85
    Hydraulic oil reservoir US gal  87.1
    Hopper capacity ft3  1.77